VK200 - Micromatic® Standard Response Upright Sprinkler (K8.0)

The Viking Micromatic® Standard Response Upright VK200 Sprinkler is a small, thermosensitive, glass-bulb spray sprinkler available in several different finishes, temperature ratings, and K-Factors to meet design requirements. The special Polyester, Polytetrafluoroethylene (PTFE), and Electroless Nickel PTFE (ENT) coatings can be used in decorative applications where colors are desired. In addition, these coatings have been investigated for installation in corrosive atmospheres and are listed/approved as corrosion resistant as indicated in the Approval Charts. (Note: FM Global approves the ENT coating as corrosion resistant. FM Global has no approval classification for PTFE and Polyester coatings as corrosion resistant.) Viking standard response sprinklers may be ordered and/or used as open sprinklers (glass bulb and pip cap assembly removed) on deluge systems. Refer to Ordering Instructions.

Technical Details:
K Factor: 8.0
Manufacturer: Viking
Page: F_032814
Part Number: 18268, 18263, 18266, 10220, 10141, 10169
VK Number: VK200

Additional Information: 
NOTICE: The product details indicated below are for general reference only and may vary based on the specific product approval and/or application. Always verify product details with the technical data sheet and consult with the Authority Having Jurisdiction (AHJ).
Max Pressure: 175 psi (12 bar)
Response Type: Standard
Occupancy Type: Light Hazard, Ordinary Hazard, Extra Hazard.
Thread Size: 3/4" NPT (20 mm BSP).
Min Spacing: Per Standards / Listings.
Max Spacing: Per Standards / Listings.